* Apec ® RO-45 RO-90 RO-Perm RO-Pump Reverse Osmosis RO Pure Water Systems - Replacement Water Filters and Reverse Osmosis Membranes

water filters reverse osmosis membranes
 Free Filter Change Reminder Email Service - Sign Up Now water filters, replacement cartridges, reverse osmosis membranes, water tests, complete parts department


water filters, replacement cartridges, reverse osmosis membranes for Everpure, Ametek, Culligan, RainSoft, US Filter, Pentek, Plymouth, Harmsco, Aqua-Pure, EcoWater, Hydrotech, Whirlpool, GE
Home | Replacement Water Filters | Reverse Osmosis Systems | Whole House Water Filters
 Refrigerator Water Filters | Pool and Spa Filters | Boat & RV Water Filters | Parts Department
 Installation and Trouble Shooting Guide | Gift GuideMy Account | Check Out

 
water filters reverse osmosis membranes
  Replacement water filters and reverse osmosis membranes - Visa accepted Replacement water filters and reverse osmosis membranes - Master Card accepted

Large selection of replacement water filters, reverse osmosis membranes, testing kits and water filtration repair parts.  From one water filter or reverse osmosis membrane to case quantity discounts.
LOW PRICES and FAST SHIPPING SINCE 1999 !
99.5% Of All Items In Stock For Same Day Shipping!

Replacement water filters and reverse osmosis membranes - Discover accepted Replacement water filters and reverse osmosis membranes -Amex accepted  
water filters reverse osmosis membranes


Apec ® RO-45 , RO-90 , RO-Perm , and RO-Pump all use the same filter set with the exception of the RO membrane. 


5 Stage TFC Reverse Osmosis System Replacement Water Filters & Membranes.
3 vertical filter housings, one top mounted horizontal inline GAC carbon filter and one
standard size top mounted horizontal RO membrane housing.

4 Stage RO Reverse Osmosis Pure Water Drinking System - Standard Size Replacement Water Filters And Membrane
Not exactly as pictured, but close.


* Apec ® RO-45 , RO-90 , RO-Perm , & RO-Pump Reverse Osmosis Systems
Compatible Replacement Water Filters and Reverse Osmosis Membranes

The Apec RO-45 , RO-90 , RO-Perm , & RO-Pump reverse osmosis system uses a TFC membrane, a 5 micron sediment pre filter and 2 carbon pre filters and then another carbon filter after the membrane to "polish" the water just before dispensing. 


Order the following sediment pre filter for the Apec RO-45 , RO-90 , RO-Perm , and RO-Pump reverse osmosis systems.

PJD 5000 5  Stage TFC Reverse Osmosis RO Pure Water System Sediment Pre Filter


"1-SED10"
The first filter housing in the Apec ® reverse osmosis system contains a sediment pre filter. This filter needs changed at least every 6 months, so order twice as many of these as the carbon filters.


Price Each: $5.99

Quantity:
Check Volume Discounts


Email a Friend


GE Osmonics ® Purtrex PX-5-978 Sediment Water Filter # 93023

GE Osmonics ® Purtrex PX-5-978 5 Micron Sediment Water Pre Filter. True-graded density pure polypropylene depth replacement water filter. # 93023 9 7/8" long X 2 1/2" diameter. 40 per case, sold individually. Order a case and save even more.


Order two of this filter for the carbon block pre filters, the second and third housings for your Apec RO-45 , RO-90 , RO-Perm , and RO-Pump  reverse osmosis systems.

PJD 5000 5 Stage TFC Reverse Osmosis RO Pure Water System Carbon Block Pre Filter


"23-CAB10"
The second and third filters in the Apec ® reverse osmosis system are the carbon pre filters.  These filters need changed at least every 12 months.


Price Each: $9.99

Quantity:
Check Volume Discounts


Email a Friend


KX Matrikx ® 10/2 Carbon Block Water Filter # 10-250-190-975

The KX 10/2 has been discontinued. If you order the KX 10/2 you will receive the GGN 10/2 Carbon Block Filter. 9 7/8" long X 2 1/2" diameter OD X 1 1/4" diameter ID. 25 per case, sold individually. Order a case and save even more.


This is the inline post GAC filter for your Apec RO-45, RO-90 , RO-Perm , and RO-Pump Reverse Osmosis Systems.  Order one.

 
PJD 5000 5 Stage TFC Reverse Osmosis RO Pure Water System Carbon GAC Post Filter


"5-TCR"
The last filter in the Apec ® reverse osmosis system is a horizontally mounted GAC carbon post filter.  The CL10RO-T/33 uses FNPT threads.


Price Each: $11.99

Thread Size FNPT

Optional Connectors

Quantity:
Check Volume Discounts


Email a Friend


Omnipure ® CL-10RO-T/33 GAC Inline Water Filter

Omnipure ® CL-10RO-T/33 GAC - 10" X 2" Carbon Inline Replacement Post Water Filter - GAC (granular activated carbon) Acid Washed Carbon - Should be changed at least every 12 months. 25 per case, sold individually. Order a case and save even more.

Check Water Filter Connector Sizes


You can save on a complete Apec RO-45 , RO-90 , RO-Perm , and RO-Pump  reverse osmosis systems filter set by ordering the combination shown below.  Reverse Osmosis membranes are sold separately from the kit and are shown further down the page.

PJD 5000 5 stage reverse osmosis replacement water filters


"FILTER-SET" for the Apec ® reverse osmosis system
Five Stage Standard RO Water Filter Change Kit


Price Each: $43.99

Inline GAC Connector Size

Optional Jaco Connectors For Threaded Post Filter

Number of Filter Sets

Omnifilter Brand

Quantity:
Check Volume Discounts


Email a Friend

Five Stage Standard RO Water Filter Change Kit - One Year Filter Change Kit: (2) 5 Micron Poly Spun Sediment Pre Filters (9 7/8") (2) 10 Micron Extruded Carbon Pre Filter (9 3/4") (1) In-Line GAC Post Filter (Granular Activated Carbon 10") FREE CARBON BLOCK UPGRADE - Our 5 stage filter replacement kit has a second carbon block pre filter to replace the GAC hard shell pre filter that comes standard in most RO systems. The sediment prefilter needs changed twice as often as the carbon filters, so our kit includes an extra one. Membranes are sold separately. LIMITED TIME OFFER - Omnifilter prefilters and post filter for additional savings. The Omnifilter post filter is only available for post filters using 1/4" quick connections.

Check Post Water Filter Connector Sizes


Apec RO-45 , RO-90 , RO-Perm , and RO-Pump Replacement Reverse Osmosis RO Membranes.

The Membrane Housing is the horizontal housing on top.

Dow Filmtec Replacement TFC Reverse Osmosis RO Membranes


"MEM 45" Compatible
* Apec ® RO-45 Reverse Osmosis Membrane


Price Each: $59.99

Replacement Membrane Housing

Replacement Flow Restrictor

Quantity:


Email a Friend

Dow Filmtec ® TW30-1812-36 RO reverse osmosis membrane # 80719

Dow Filmtec ® TW30-1812-36 TFC 36 GPD RO reverse osmosis membrane - standard size 1.75" X 11.75" Part # 80719

Learn How To Upgrade Your Reverse Osmosis Membrane Capacity

Apec RO-90 Replacement Reverse Osmosis Membrane


"MEM 90" Compatible
* Apec ® RO-90 , RO-Perm, Ro-Pump & RO-CTOP Replacement RO membranes


Price Each: $74.99

Replacement Membrane Housing

Replacement Flow Restrictor

Quantity:
Check Volume Discounts


Email a Friend

Dow Filmtec ® TW30-1812-75 (BW60-1812-75) RO reverse osmosis membrane # 114731

Dow Filmtec ® TW30-1812-75 (BW60-1812-75) TFC 75 GPD RO reverse osmosis membrane - standard size 1.75" X 11.75" Part # 114731

Learn How To Upgrade Your Reverse Osmosis Membrane Capacity


Additional Apec Compatible Replacement Filters, Membranes and parts.


FI-PB1                 Filter Cartridge for CT-1000
FI-CERAMI            Filter Cartridge for CT-2000
TANK-4 Tank        4 gallon Pressurized (Amtrol NSF, tank ball valve sold separately)
TANK-14              14 gallon Pressurized (Amtrol NSF, tank ball valve sold separately)
TBVAL1/4             Tank Ball Valve - 1/4" (for standard 4  gallon tanks)
MEM-130             4th stage RO Membrane 130 GPD (light commercial)
CT-24CAB            Countertop:2nd or 4th stage Carbon FilterK2533
                                       (Quick-Connect type Omnipure NSF)
1-SED20              Commercial: 1st stage Sediment Pre Filter
                                        20" 5 micron high capacity Polypropylene
                                        NSF (For LITE Commercial and PLUS Commercial Models)
23-CAB20             Commercial: 2nd or 3rd stage Carbon Filter 20"
                                       10 micron MatriKX extruded carbon block NSF
                                       (For LITE Commercial and PLUS Commercial Models)
CP-5                    Commercial: 1st stage Pleated Sediment Filter
                                       10" 5 micron Pleated Sediment filter NSF,
                                       (For Compact Commercial Model)
PUMP-PERMEATE    Permeate Pump For filling tank faster and saving water.
                                       Great in low pressure areas of pressure.  Minimum inlet 30 PSI.
WRENCH Wrench    Filter Housing Wrench
FAUCET                Long Reach Standard Calif. Low Lead Level Faucet
 


Parts Department Featured Items For Water Filtration And Reverse Osmosis RO Systems
 
TDS Meter - Tester To Test For Total Disolved Solids In Water


How Pure Is Your Water?    Find Out!

Price Each: $37.99

Calibration Solution

Quantity:
Check Volume Discounts


Email a Friend

TDS Meter - Test For Total Dissolved Solids In Water - Reverse Osmosis Membrane Tester - TDS Meter

TDS Meter - Tester. The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - Total dissolved solids (TDS) are the total weight of all solids (minerals, salts or metals) that are dissolved in a given volume of water expressed in milligrams per liter (mg/L), or in parts per million (PPM). The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. 17 PPM of TDS = 1 grain of hardness. Highly efficient and accurate due to its advanced microprocessor technology. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Display: large and easy-to-read LCD screen. Factory Calibrated: recalibration is not necessary, but can be done easily with a watch screwdriver. There's no need for messy solutions to initially calibrate the meter. Range: 0 - 9990ppm (mg/L) Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use Dimensions: 14 x 2.3 x 1.5cm (5.5 x .9 x .55 inches) Weight: 32g (1.13 oz) Simple to use for Reverse Osmosis membrane monitoring. Measure the incoming water and the RO water. Divide the larger number into the smaller number and subtract that decimal from 1. The resulting decimal is the percent of TDS that the membrane is removing. We really like this tester and think that anyone who wants to know about the quality of their water should have one of these TDS Meter Testers.

Learn more about using TDS meters and total dissolved solids

TDS Meter - Easily Installs Inline
 

Price Each: $49.99
Sale Price: $39.99
Savings: $10.00

Tube Size

Quantity:

Check Volume Discounts


Email a Friend


TDS Meter Inline Tester- Dual Mode Reading - Easily Installs Inline - Very Simple To Use

TDS Meter - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. Simply cut the line out from the RO membrane housing and install the inline probe between the membrane housing and the shutoff valve, when possible. The closer to the membrane housing the better. Insert the ends of the tube into the John Guest quick connectors on the TDS meter probe. Then cut the inlet feed water line to the system and install the other T/probe. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Cable Length: 24.5" (including sensor) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Weight: 79.4 g (2.8 oz.) Always know if your RO membrane is performing correctly!

Learn more about using TDS meters and total dissolved solids

Dow Corning ® 111 5 gram O-ring Silicone Lubricant and Sealant


Prevent Leaks!


Price Each: $3.99

Package Size

Quantity:

Check Volume Discounts


Email a Friend

Dow Corning (Molykote) ® 111 6 gram O-ring Silicone Lubricant and Sealant - Be sure to lube your O-rings to help prevent leaks.

Dow Corning/Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?

Dow 111 Silicone MSDS Safety Sheet

Leak Controller for Reverse Osmosis Systems, Refrigerators, Ice Makers and Coffee Machines
 


Price Each: $79.99
Sale Price: $49.99
Savings: $30.00

Connector Size

Quantity:

Check Volume Discounts


Email a Friend

Leak Controller for Reverse Osmosis Systems, Water Coolers, Refrigerators, Ice Makers and Coffee Machines.

Save a flood inside the house. Prevent costly water damage. Automatically shut off the water to leaking Reverse Osmosis Systems, Water Coolers, Refrigerators, Ice Makers and Coffee Machines. Alarm flashes and beeps to notify you to the system shut down. Very simple to install and use. Brilliant design. Simply place the sensor (Similar in size to a small computer mouse) where water will collect below the system. Cut the incoming 1/4" or 3/8" water tube and insert each end into the quick connectors on the controller. When the sensor gets wet it shuts off the incoming water at the controller. Reset the sensor by wiping it dry. # AS-414 with 4 1/2' cord that connects the sensor. The Leak Controller is a great way to control costly leaks.

Pro Products Sani - System Sanitizer
 

Price Each: $7.99
Sale Price: $4.99
Savings: $3.00

Product Size


Quantity:
Check Volume Discounts


Email a Friend

Pro Products Sani System Sanitizer

Pro Products Sani System Sanitizer. 0.25 or 0.5 fl. oz. concentrate. Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Sani-System is now NSF certified! Directions for Use It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Sanitization of Interior Surfaces of Water Softeners and Reverse Osmosis (RO) Units. Water Softeners Sanitization should occur after initial installation, after the system is serviced and periodically during its use. Backwash the softener and add 1 ounce of sanitizer per 8 gallons of water (200 ppm active quaternary) to the brine tank well. (NOTE: standard systems capacity is 48 gallons,) (The brine tank should have water in it to permit the solution to be carried into the softener.) Proceed with the normal regeneration or interrupt the cycle after the brining step and let the softener soak for a minimum of 60 seconds. Backwash the softener with potable water to make sure all sanitizing solution is thoroughly rinsed from the unit before returning it to service. Reverse Osmosis (RO) Units Sanitization should occur after initial installation, after the system is serviced and periodically during its use. Turn off RO system, drain storage tank and remove membrane element and pre-filters. Put membrane element in a plastic bag so it remains wet. Fill empty pre-filter housing with 1 ounce of sanitizer per 8 gallons of water (200 ppm active sanitizer) and turn on raw water. (NOTE: standard system capacity is 2-3 gallons) After holding tank is full, let system stand idle for a minimum of 60 seconds. Turn off water. Drain holding tank. Before the system is put back into service, flush system with potable water to assure sanitizing solution is rinsed thoroughly form system. Follow the manufacturer’s directions for re-installation of new per-filters, membrane elements and post filter, membrane element and post filter. Sanitation of interior surfaces of Ice Machines, Water Coolers, Water holding tanks and Pressure tanks, Ice Machines Sanitization should occur after initial installation, after the machine is serviced and periodically during its use. Shut off incoming water line to machine. Prepare a solution of 1 oz. of sanitizer per 8 gallons of water (200 ppm active quaternary) Circulate solution through machine making user to wet all surfaces and allow a minimum contact of 60 seconds. Drain and completely flush system twice with portable water. Storage and disposal DO NOT CONTAMINATE WATER, FOOD OR FEED BY STORAGE OR DISPOSAL - Store in a dry place no lower in temperature then 50 degrees F or higher than 120 degrees F. Shipping information Non-hazardous. This is the best sanitizing solution available anywhere! Stock up and save.


Be sure to check our Parts Department for important parts such as TDS Testers For Reverse Osmosis Membranes, Replacement Tanks, O-rings , Filter Housing Wrenches, Faucets, Pumps, Fittings, UV Systems and more parts for your reverse osmosis pure water filtration system.   View maintenance and servicing tips online at our Installation & Trouble shooting Guide.

* Apec ® is the registered trademark of Apec of Rowland Heights, California the manufacturer of Apec ® brand water treatment equipment.  The replacement filters and membranes listed above are not manufactured or endorsed by Apec.  Rather, these filters and membranes are manufactured by other companies.  While these filters and membranes are compatible for use in Apec ® brand water treatment equipment, we make no representation as to whether using these filters and membranes is consistent with the warranty applicable to Apec ® equipment.


Customer Service

My Account

Quick Ship Shipping Times

Testimonials

Add To Favorites

Email Reminder Service
Check Out

Copyright © 1999-2017 WaterFiltersOnline.com, LLC, Huntington, IN  46750 U.S.A., except those displayed and owned by their respective companies.  All rights reserved.  "Compatible" Legal Disclaimer.

Send Us Email

Replacement water filters and reverse osmosis membranes